Viton O Ring Product

Viton has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Low temperature resistance is normally not favorable and for static applications is limited to approximately -26°C (-15°F) although certain compounds are suitable down to -46°C (-50°F). Under dynamic conditions, the lowest service temperature is between -15°C and -18°C (5°F and 0°F). Gas permeability is very low and similar to that of butyl rubber. Special FKM compounds exhibit an improved resistance to acids and fuels

Model:KXT 1710

Send Inquiry

Product Description

Viton O Ring or FKM O Ring

Viton O-rings offer excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many

organic solvents and chemicals making it excellent for o-ring, gasket and seal materials. Viton O-rings or FKM O-rings, fluorocarbon rubber

O-rings provide excellent permeability and compression set resistance.

Viton O-rings (FKM O-rings) have low gas permeability and Viton O-rings (FKM O-rings) are commonly used as gaskets in fuel system sealing

applications. Other fluorocarbon compounds can also offer improved resistance to acids, fuels, water and steam

Advantages

• Long time using time to save your money cost

• Eexcellent resistance to high temperatures

• Increase high temperature capability

• Excellent Permeation Resistance

• Moderate Short-Term Resilience

• Resist Aggressive Fluids

• Good Wear Resistance

Application

• Off-Highway and Heavy-Duty Equipment

• Chemical Processing and Transportation

• Petroleum Refining and Transportation

• Aircrafts and Aerospace

• Automotive., etc

Viton Properties

Item	Viton/FKM	Test Method
Color	Black/Yellow
Specific gravity	1.75-2g/cm3	ASTM D297
Hardness	65°-95 Shore A	ASTM D2240
Tensile strength	7 MPa (min)	ASTM D412
Elongation at break	200% (min)	ASTM D412
Size	Varies
Compression set 200°C 22 hrs	Permanent set 25%(max)	ASTM D 395B
Tear strength	25 N/mm (min)	ASTM D624
Temperature range	-30°C to +250°C